SAE 0W20 API SN/ SM / SL GASOLINE ENGINE OIL- DANA GOLD ENGINE OIL- FULLY SYNTHETIC SEMI SYNTHETIC PREMIUM ENGINE OIL

Performance Standard : API SN/ SM / SL

SAE 0W20 API SN/ SM / SL is an advanced full synthetic engine oil designed to help deliver outstanding engine protection and enhanced fuel economy. SAE 0W20 API SN/ SM / SL gasoline engine oil meets the requirements of various vehicle manufacturers and industry standards and outperforms conventional oils.  

EVO

E – Extra Protection to Engine, Clutch & Gears

V – Value for Money with 70% Extra Mileage

O – Outstanding Performance in all Weathers

Applications :

SAE 0W20 API SN/ SM / SL gasoline engine oil is recommended by DANA Lubes for SAE 5W-20 and 0W-20 applications in all types of gasoline fueled passenger cars, SUV’s, vans, and light trucks.

  • It is engineered to help deliver outstanding engine protection and fuel economy benefits.
  • It  is recommended for extreme cold conditions to help deliver quick starts and fast lubrication.
  • It is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.

 

Specifications :

SAE 0W-20 meets the requirements of :

API SN,SM,SL,SJ
ILSAC GF-5
Ford WSS-M2C947-A

 

Features Advantages
Low viscosity, advanced full synthetic formula Helps improve fuel economy based on 0.2-2.3% potential fuel economy improvement obtained by switching from higher viscosity oils to a 0W-20 grade. Actual savings are dependent upon vehicle/engine type, outside temperature, driving conditions.
Thermal and oxidation stability Helps to reduce oil aging resulting in long lasting protection.
Low temperature capabilities Quick cold weather starting and fast protection helps to extend engine life
Balanced additive component system Excellent overall lubrication and wear protection performance for many driving styles and conditions, from mild to severe, where a 5W-20 or 0W-20 is recommended

Technical Specifications :

SAE 0W20 API SN/ SM / SL

SAE Grade 0W-20
Viscosity, @ 100ºC, cSt  (ASTM D445) 8.7
Viscosity, @ 40ºC, cSt  (ASTM D445) 44.8
Viscosity Index 173
Sulfated Ash, wt% (ASTM D874) 0.8
HTHS Viscosity, mPa•s @ 150ºC (ASTM D4683) 2.7
Phosphorous (ASTM D4951) 0.065
Flash Point, ºC (ASTM D92) 224
Total Base Number (ASTM D2896) 8.8
MRV @ -40ºC (ASTM D4684) 9200
Density @15.6ºC g/ml (ASTM D4052) 0.841

Handling health & Safety :

Lubricants consisting of highly refined mineral oils with specification additives. In normal conditions of use, this lubricant presents no particular toxic hazard. All lubricants, of any kind should be handled with great care, particularly avoiding can contact with the skin.

Prevent any splashing, and keep away from combustible materials. Store under cover and away from any risk of pollution. Dispose off the used oil correctly; don’t pour down drains, into watercourses or the soil.